Schedule By Group Daily Schedule By Topics Lecturer Class Room By Student No Lecturer

Listing schedules

From ~ To	Course	Topic	Type	Trainer	Classroom	Action
Mon 29-May
Group 2
08:30 ~ 09:30	000A00	1 ~ Training Launch Introduction	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
08:30 ~ 09:30	000F01	1 ~ Introduction OPV 1800.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
09:30 ~ 10:30	000F01	2 ~ Ship's Operational Capabilities.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
11:00 ~ 13:00	000F02	2 ~ The Ship's Major System and Equipments.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
11:00 ~ 13:00	000F01	3 ~ Vessel Layout.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
13:00 ~ 14:00	000000	Lunch Break	C			Show Edit Destroy
14:00 ~ 15:00	000F01	6 ~ SOLAS Equipment and Fire Fighting Onboard.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
14:00 ~ 15:00	000F01	5 ~ Emergency Station.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:30 ~ 15:45	000000	Tea Break				Show Edit Destroy
16:00 ~ 17:00	000F02	1 ~ Safety Systems and Lifesaving Equipment.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
Tue 30-May
Group 2
10:30 ~ 10:45	000000	Morning Tea Break			Classroom 4	Show Edit Destroy
11:00 ~ 12:00	000F02	3 ~ The Ship's Auxiliary System.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
12:00 ~ 13:00	000000	Lunch Break	C		Classroom 4	Show Edit Destroy
14:00 ~ 15:00	000F01	4 ~ Deck Arrangements.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
14:00 ~ 15:00	000F02	4 ~ Deck Machineries.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:00 ~ 15:30	110F01	3 ~ ICAF - Check the condition and functionality of Control Panel Unit and display.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:00 ~ 15:15	110F01	1 ~ ICAF - Perform maintenance tasks which are specified under “Daily”.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:15 ~ 15:30	110F01	2 ~ Clean and upkeep the Control Panel and cabinet.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:30 ~ 15:45	000000	Tea Break				Show Edit Destroy
16:00 ~ 17:00	000F02	5 ~ Other Electronics Equipments and systems Onboard.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
16:00 ~ 16:30	110F01	4 ~ Check cables connection on terminals for tightness and damage.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
16:00 ~ 16:20	110F01	5 ~ Electrical Checks on Protective devices and safety circuit.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
Wed 31-May
Group 2
10:30 ~ 10:45	000000	Morning Tea Break			Classroom 4	Show Edit Destroy
13:00 ~ 14:00	000000	Lunch Break	C		Classroom 4	Show Edit Destroy
15:30 ~ 15:45	000000	Tea Break			Classroom 4	Show Edit Destroy
Thu 01-Jun
Group 2
16:00 ~ 17:00	000F02	6 ~ Bilges, Ballast and Internal Fi-Fi System.	C	Khairul Azuadi Bin Ariffin	Classroom 4	Show Edit Destroy
Mon 12-Jun
Group 2
08:30 ~ 09:10	320M01	1 ~ Fuel Oil Transfer System: Clean and inspect – Pumps, valves, motors, control panel.	C	Damen 1	Classroom 1	Show Edit Destroy
09:10 ~ 10:10	320M01	2 ~ Fuel Oil Transfer System: Start/stop Local, auto & emergency – Transfer operations, performance of pumps.	C	Damen 1	Classroom 1	Show Edit Destroy
10:10 ~ 10:20	320M01	3 ~ Fuel Oil Transfer System: Clean, inspect and check insulation – Electrical equipment, Insulation tester.	C	Damen 1	Classroom 1	Show Edit Destroy
Wed 14-Jun
Group 2
08:30 ~ 09:00	320M01	4 ~ Fuel Oil Purifier: Clean and inspect – Control panel, pump, motor, valve.	C	Damen 1	Classroom 1	Show Edit Destroy
09:00 ~ 09:05	320M01	7 ~ Fuel Oil Purifier: Inspect earth bonding – Earthing strap, Continuity tester.	C	Damen 1	Classroom 1	Show Edit Destroy
09:05 ~ 09:35	320M01	8 ~ Fuel Oil Supply System: Day tanks, purified FO to consumers, water and sludge line, valves, overflow line.	C	Damen 1	Classroom 1	Show Edit Destroy
09:35 ~ 10:05	320M01	9 ~ Cargo Handling Fuel Oil System: Clean and Inspect – Bunkering points, Control panel.	C	Damen 1	Classroom 1	Show Edit Destroy
10:05 ~ 10:20	320M01	10 ~ Cargo Handling Fuel Oil System: Inspect after use – Safety procedures, and procedure after after use.	C	Damen 1	Classroom 1	Show Edit Destroy
10:20 ~ 10:35	320M01	11 ~ Check and inspect: Day tank and water trap – sight glass, alarms an activation.	C	Damen 1	Classroom 1	Show Edit Destroy
11:00 ~ 11:15	341M01	1 ~ Fresh Water Supply System: Clean & Inspect - Motors, starters, cables and terminations, mountings and fastenings.	C	Damen 1	Classroom 1	Show Edit Destroy
11:15 ~ 11:55	341M01	2 ~ Fresh Water Supply System: Functional Checks Motors & Starters - Pre starting checks, performance and abnormalities.	C	Damen 1	Classroom 1	Show Edit Destroy
11:55 ~ 12:35	341M01	3 ~ Fresh Water Supply System: Clean & Inspect - Pumps & Outfits; couplings, valves, filters, gauges, pipes and fastenings.	C	Damen 1	Classroom 1	Show Edit Destroy
12:35 ~ 12:45	341M01	4 ~ Fresh Water Supply System: Clean, Inspect and Check Insulation – cables & terminations	C	Damen 1	Classroom 1	Show Edit Destroy
12:45 ~ 12:50	341M01	5 ~ Fresh Water Supply System: Inspect - Earth Bonding.	C	Damen 1	Classroom 1	Show Edit Destroy
12:50 ~ 13:10	341M01	7 ~ Fresh Water Supply System: Run Pump if not in regular use – Pre starting checks, check performance, leaks, abnormalities.	C	Damen 1	Classroom 1	Show Edit Destroy
14:00 ~ 14:15	320M01	5 ~ Fuel Oil Purifier: Functional checks – Health checks using the Control panel.	O	Damen 1	On Board	Show Edit Destroy
14:15 ~ 14:25	320M01	6 ~ Fuel Oil Purifier: Clean, inspect and check insulation – Electrical equipment, cables and termination, Insulation tester.	O	Damen 1	On Board	Show Edit Destroy
14:25 ~ 18:25	320M01	12 ~ On Board Familiarisation.	O	Damen 1	On Board	Show Edit Destroy
16:00 ~ 16:15	341M01	6 ~ Fresh Water Supply System: Clean & Inspect - Pressure Control Switch.	O	Damen 1	On Board	Show Edit Destroy
Fri 16-Jun
Group 2
09:30 ~ 10:00	400M01	1 ~ Initial Step- Examine the general conditions and operational status prior to perform the tasks.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:00 ~ 10:20	400M01	2 ~ Diesel Generator - Visual inspection for leaks and signs of loose connections.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:20 ~ 10:50	400M01	3 ~ Diesel generators - Perform Daily Checks and Inspection iaw PMS and service routine.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:50 ~ 11:05	000000	Tea Break			Classroom 1	Show Edit Destroy
11:05 ~ 11:25	400M01	4 ~ Diesel generators: Check Fuel System Primary Filter and drain as necessary.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:25 ~ 11:45	400M01	6 ~ Diesel generators: Check the Governor Actuator Linkage	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:45 ~ 12:05	400M01	7 ~ Diesel generators: Check the condition of Governor Actuator Linkage.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:05 ~ 12:35	400M01	8 ~ Diesel generators: Test the Cooling Syst. Supplemental Cool. Additive (SCA)	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:35 ~ 14:35	000000	Friday Lunch				Show Edit Destroy
14:35 ~ 15:05	400M01	10 ~ Diesel generators: Check and examine DG Protection devices.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:05 ~ 15:25	400M01	11 ~ Diesel generators: Examine and clean the Oil Mist Detector free from dirt and corrosion	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:25 ~ 15:45	400M01	12 ~ Diesel generators : Clean and Inspect. the Magnetic Pick Ups	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:45 ~ 16:00	000000	Tea Break				Show Edit Destroy
16:00 ~ 16:30	400M01	13 ~ Diesel generators: Examine and replacement of DG Oil Filters	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:30 ~ 16:50	400M01	5 ~ Diesel generators: Inspect the condition of Zinc Rod	O	Caterpillar 1	On Board	Show Edit Destroy
16:50 ~ 17:10	400M01	9 ~ Diesel generators: Check starting Motor conditions and clean as necessary.	O	Caterpillar 1	On Board	Show Edit Destroy
17:10 ~ 17:40	400M01	14 ~ Diesel generators: Inspect the DG mountings for signs of damage and vulcanised	O	Caterpillar 1	On Board	Show Edit Destroy
Mon 19-Jun
Group 2
09:30 ~ 09:50	400M01	15 ~ Diesel Generators: Examine and clean the Fuel System Primary Filter.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
09:50 ~ 10:10	400M01	16 ~ DG - Check and lubricate Barring device	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:10 ~ 10:30	400M01	17 ~ DG: Examine and lubricate Prelube Pump	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:15	400M01	18 ~ DG: Examine Fuel System Secondary Filter - Change Element.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:15 ~ 11:45	400M01	20 ~ Emergency Diesel Generator ( EDG): Inspect Electrical EDG Instrument Panel.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:45 ~ 12:15	400M01	21 ~ EDG: Perform daily checks i.a.w PMS and Checklist	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:35	400M01	23 ~ EDG: Fuel System Primary Filter - Drain.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:35 ~ 12:55	400M01	24 ~ EDG: Check the EDG Lube Oil Level within the tolerence.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:55 ~ 13:55	000000	Lunch Break	C			Show Edit Destroy
13:55 ~ 14:15	400M01	25 ~ EDG: Fuel System Primary Filter/Water Separator Drain	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:15 ~ 14:35	400M01	26 ~ EDG: Engine - Inspect for leaks and loose connection.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:35 ~ 14:55	400M01	27 ~ EDG: Inspect Hoses and Clamps for leaks and tightness	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:55 ~ 15:15	400M01	28 ~ EDG: Fuel Tank Water and Sediment - Drain	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:15 ~ 15:35	400M01	30 ~ EDG: Governor Actuator Linkage - Check the conditions..	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:35 ~ 15:50	400M01	31 ~ EDG - Check electrolyte level within acceptable limit.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:50 ~ 16:05	000000	Tea Break				Show Edit Destroy
16:05 ~ 16:25	400M01	19 ~ DG: Inspect the Exhaust Piping and system.	O	Caterpillar 1	On Board	Show Edit Destroy
16:25 ~ 16:55	400M01	22 ~ EDG: Walk-around and visual inspection	O	Caterpillar 1	On Board	Show Edit Destroy
16:55 ~ 17:15	400M01	29 ~ EDG: Check Fan clearence and no obstructions	O	Caterpillar 1	On Board	Show Edit Destroy
Tue 20-Jun
Group 2
09:30 ~ 09:45	400M01	32 ~ EDG: Obtain or collect coolant sample (level1)	C	Caterpillar 1	Classroom 1	Show Edit Destroy
09:45 ~ 10:00	400M01	34 ~ EDG: Test Cooling Syst. Supplemental Cool. Additive (SCA)	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:00 ~ 10:15	400M01	36 ~ EDG: Check EDG moutings for crack, vulcanised and sign of damage	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:30 ~ 10:45	400M01	33 ~ EDG: Check EDG Protection devices.	O	Caterpillar 1	On Board	Show Edit Destroy
10:45 ~ 11:15	400M01	35 ~ EDG H500: Check, or replace Filters and Elements: Engine Oil - Fuel Filter,Fuel System primary and Secondary and Engine Air Cleaner Element (Single Element)	O	Caterpillar 1	On Board	Show Edit Destroy
11:15 ~ 13:15	400M01	37 ~ DG & EDG: Practical Site Survey and Inspection on the System and Components onboard.	O	Caterpillar 1	On Board	Show Edit Destroy
13:15 ~ 14:15	000000	Lunch Break	C			Show Edit Destroy
14:15 ~ 14:35	411M01	1 ~ Diesel Generators (DG) and Emergency (EDG): Examine the general conditions and system operation before start to perform the task.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:35 ~ 14:55	411M01	2 ~ DG and EDG: Check Fuel System Primary Filter and Drain.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:55 ~ 15:15	411M01	3 ~ DG and EDG: Perform Daily Checks as stipulated in PMS and service instruction.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:15 ~ 15:35	411M01	4 ~ DG and EDG: Check Oil Mist Detector for operation and cleanliness.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
15:35 ~ 15:50	000000	Tea Break				Show Edit Destroy
15:50 ~ 16:05	411M01	5 ~ DG and EDG: Inspect DE Instrument Panel for cleanliness, functionalities and any signs of abnormilities.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:05 ~ 16:25	411M01	6 ~ DG and EDG: Examine and Inspect for leaks and loose connection.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:25 ~ 16:45	411M01	7 ~ DG and EDG: Cooling Syst. Supplemental Cool. Additive (SCA) - Test.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:45 ~ 17:05	411M01	8 ~ DG and EDG: Check and examine Governor Actuator Linkage for looseness, misalignment and stiffness.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
17:05 ~ 17:20	411M01	9 ~ DG and EDG: : Inspect crankshaft vibration damper.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
Wed 21-Jun
Group 2
09:30 ~ 10:00	411M01	10 ~ DG and EDG: Engine Oil Filter - Change.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:00 ~ 10:30	411M01	11 ~ DG and EDG: Inspect DG Instrument Panel.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:15	411M01	12 ~ DG and EDG: Cooling Syst. Supplemental Cool. Additive (SCA) - Test.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:15 ~ 11:30	411M01	13 ~ DG and EDG: Engine Protection devices - Check.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:30 ~ 11:45	411M01	14 ~ DG and EDG: Obtain Diesel Generators Oil Sample.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:45 ~ 12:00	411M01	15 ~ DG and EDG: Check Starting Motor connections tightness and signs of abnormilities.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:15	411M01	16 ~ DG and EDG: Check Battery and charging unit charging current and float voltage in good working condition. Battery are fully charged.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:35	411M01	17 ~ DG and EDG: Examine and check Engine Mounts for signs of abnormilities damage and vulcanised.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:35 ~ 13:35	000000	Lunch Break	C			Show Edit Destroy
13:35 ~ 15:35	411M01	18 ~ Electrical Plant - Generators: Practical Site Survey and inspection on the system and components onboard.	O	Caterpillar 1	On Board	Show Edit Destroy
15:35 ~ 15:50	000000	Tea Break				Show Edit Destroy
15:50 ~ 16:20	745M01	1 ~ MC & PCS - Examine the general conditions, and system functional prior to performing any task.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:20 ~ 16:50	745M01	2 ~ Machinery Control and Propulsion Control Systems (MC & PCS): Check condition and functionality of Display Panel and Indicating Lights including LED.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
16:50 ~ 17:20	745M01	3 ~ MC & PCS - Check condition of Electronic devices and LRUs.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
Thu 22-Jun
Group 2
09:30 ~ 10:00	745M01	4 ~ MC & PCS - Check cooling or ventilation fan operation and no obstruction of air flow.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:00 ~ 10:30	745M01	5 ~ MC & PCS - Check sensing, audible and visual devices fitted and installed in the alarm, safety, and warning systems.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:15	745M01	6 ~ MC & PCS - Clean external and Internal surfaces of console free from dirt, moisture and sign of corrosion for the console cabinet.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:15 ~ 11:45	745M01	7 ~ MC & PCS - Check input main and back-up power supply. Inspect terminal blocks,circuit breakers and protective devices.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
11:45 ~ 12:15	745M01	8 ~ MC & PCS - Clean panel free from dust, dirt and corrosion. Perform cleanliness and preservation as necessary.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:45	745M01	10 ~ MC & PCS - Check earth grounding straps for continuity and tightness.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
12:45 ~ 13:45	000000	Lunch Break	C		Classroom 1	Show Edit Destroy
13:45 ~ 14:15	745M01	9 ~ MC & PCS - Inspect cable installation for loose connections and clean cable bundles free from dirt, duct and moisture.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:15 ~ 14:45	745M01	11 ~ PC-PCS Safety and Handling - Observe Pre checks, safety procedures and practices, handling of hazardous materials when performing the work before, during and after performing the task.	C	Caterpillar 1	Classroom 1	Show Edit Destroy
14:45 ~ 15:00	000000	Tea Break			Classroom 1	Show Edit Destroy
15:00 ~ 17:00	745M01	12 ~ MC-PCS - Practical Site Survey and inspection on the system and components onboard.	O	Caterpillar 1	On Board	Show Edit Destroy
Fri 23-Jun
Group 2
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
12:35 ~ 14:35	000000	Friday Lunch				Show Edit Destroy
15:45 ~ 16:00	000000	Tea Break				Show Edit Destroy
16:25 ~ 16:40	000000	Tea Break				Show Edit Destroy
Mon 26-Jun
Group 2
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
Tue 27-Jun
Group 2
13:00 ~ 14:00	000000	Lunch Break	C			Show Edit Destroy
Wed 12-Jul
Group 2
08:30 ~ 08:50	710M01	2 ~ SOLAS Equipment in DGPS - Perform Daily Checks including Start up, running and shutdown procedures.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
08:50 ~ 09:10	710M01	3 ~ Above Deck Equipment Antennas: - Visual inspection for any signs of salt deposit, dirt and water. Clean and preserve.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
09:10 ~ 09:30	710M01	4 ~ Check operation from Remote (ICS and INS Network) and Local Positions.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
09:30 ~ 09:50	710M01	5 ~ Connectors: Check that connectors on the rear panel are firmly tightened and free of rust.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
09:50 ~ 10:20	710M01	6 ~ Earth bonding Straps - Check that the ground system is free of rust and the ground wire is tightly fastened.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
10:20 ~ 10:40	710M01	7 ~ Check that battery voltage is sufficient and fully charged and terminal are clean and free from rust.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
11:00 ~ 11:30	710M01	8 ~ Antenna Unit - Keep all electrical connections and mechanical fastenings tight according to right torque, and the fastenings are dry, clean and rust free.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
11:30 ~ 11:50	710M01	9 ~ Antenna Unit - Perform cleaning and remove dust, dirt and rust with detergent, do not use chemical cleaner or solvent.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
11:50 ~ 12:10	710M01	10 ~ LCD Display - Clean and wipe the LCD display with soft cloth to remove dirt salt deposit.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
12:10 ~ 12:30	710M01	13 ~ Self check and BITE - Check the ROM, RAM, input /output data, GPS Core, Beacon, Keyboard and LCD performance.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
12:10 ~ 12:30	710M01	11 ~ LCD ambient temperature and humidity - Maintain cooling and ventilation for ambient temperature and humidity.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
12:30 ~ 12:50	710M01	12 ~ Protective Device - Fuse is to protect over voltage and short circuit current and may be replaced with specified rating and size.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
14:00 ~ 14:20	710M01	14 ~ Inspect and test the equipment at sufficient intervals to make sure that the equipment is in operating condition.	C	Sinor Marine Technologies 1	Classroom 2	Show Edit Destroy
14:20 ~ 15:20	710M01	1 ~ Examine the general physical conditions of the system/Equipment and Principle of operation prior to perform any task.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:00 ~ 17:00	710M01	15 ~ Perform Practical Site Survey and inspection of the system and components onboard.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
Fri 21-Jul
Group 2
11:35 ~ 11:50	000000	Morning Tea Break				Show Edit Destroy
Mon 24-Jul
Group 2
13:30 ~ 14:30	000000	Lunch Break	C			Show Edit Destroy
16:05 ~ 16:20	000000	Tea Break				Show Edit Destroy
Tue 25-Jul
Group 2
09:30 ~ 10:10	341M01	8 ~ Fresh Water Makers: Daily Checks Reverse Osmosis – Control panel, Filters, differential pressures, Oil level.	C	Damen 1	Classroom 1	Show Edit Destroy
10:10 ~ 10:25	341M01	9 ~ Fresh Water Makers: Check Filling heights – Deacidification Filter heights	C	Damen 1	Classroom 1	Show Edit Destroy
10:25 ~ 10:40	000000	Morning Tea Break				Show Edit Destroy
10:40 ~ 10:50	341M01	10 ~ Fresh Water Makers: Stop Rinse – Module Membrane.	C	Damen 1	Classroom 1	Show Edit Destroy
10:50 ~ 11:00	341M01	11 ~ Fresh Water Makers: Clean – Module Membrane.	C	Damen 1	Classroom 1	Show Edit Destroy
11:00 ~ 11:10	341M01	12 ~ Fresh Water Makers: Check Torque – Module Membrane.	C	Damen 1	Classroom 1	Show Edit Destroy
11:10 ~ 11:25	341M01	13 ~ Fresh Water Makers: RO unit - Change Lub Oil	C	Damen 1	Classroom 1	Show Edit Destroy
11:25 ~ 11:55	341M01	14 ~ Hot Water Circuit: Run Pump if not in regular use – Pre starting checks, Control panel, check performance, leaks, and abnormalities.	C	Damen 1	Classroom 1	Show Edit Destroy
11:55 ~ 12:15	341M01	15 ~ Hot Water Circuit: Clean & Inspect – Control Panel, HW Circulating Pump and motors, Valves, cables and terminations	C	Damen 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:25	341M01	16 ~ Hot Water Circuit: Functional Checks- Control panel	C	Damen 1	Classroom 1	Show Edit Destroy
12:25 ~ 12:35	341M01	17 ~ Hot Water Circuit: Clean, Inspect and Check Insulation – Motors & Control Panel.	C	Damen 1	Classroom 1	Show Edit Destroy
12:35 ~ 12:40	341M01	18 ~ Hot Water Circuit: Inspect Earth Bonding – Motors, control Panel.	C	Damen 1	Classroom 1	Show Edit Destroy
12:50 ~ 13:00	341M01	19 ~ Hot Water Circuit: Clean and Inspect – Pressure Control Switch.	C	Damen 1	Classroom 1	Show Edit Destroy
13:00 ~ 14:00	000000	Lunch Break	C			Show Edit Destroy
14:00 ~ 16:00	341M01	20 ~ On Board Familiarisation	O	Damen 1	On Board	Show Edit Destroy
Thu 27-Jul
Group 2
09:30 ~ 10:00	670M01	1 ~ Sprinkler System - Clean and inspect: Compressed air pipe coupling, test valves, sprinklers head.	C	Damen 1	Classroom 1	Show Edit Destroy
10:00 ~ 10:20	670M01	2 ~ Sprinkler System - Check Audibles & Visual Alarm & Water Pressure: Check audibles & visual alarm and water pressure.	C	Damen 1	Classroom 1	Show Edit Destroy
10:20 ~ 11:00	670M01	3 ~ Water Mist System (Control Panel) - Inspect externally: Control panel, water pump, valve, nozzles.	C	Damen 1	Classroom 1	Show Edit Destroy
11:00 ~ 11:15	000000	Morning Tea Break			Classroom 1	Show Edit Destroy
11:15 ~ 11:35	670M01	4 ~ Water Mist System - Clean and inspect water pump and outfit: Clean and inspect water pump and outfit, manual and auto operation.	C	Damen 1	Classroom 1	Show Edit Destroy
11:35 ~ 11:50	670M01	5 ~ Water Mist System (Control Panel): Clean and inspect internally.	C	Damen 1	Classroom 1	Show Edit Destroy
11:50 ~ 12:05	670M01	6 ~ Water Mist System - Alarm Checks: Control panel self tests and Alarm activation.	C	Damen 1	Classroom 1	Show Edit Destroy
12:05 ~ 12:45	670M01	7 ~ Foam System - Clean externally: Foam and fire pumps, valves, monitors, hoses, nozzles.	C	Damen 1	Classroom 1	Show Edit Destroy
12:45 ~ 13:00	670M01	8 ~ Foam System - Functional Checks: Pre starting checks, procedure when running the fire pump.	C	Damen 1	Classroom 1	Show Edit Destroy
13:00 ~ 13:15	670M01	9 ~ Foam System - Operational Check: Pre starting check, Operational procedures, performance.	C	Damen 1	Classroom 1	Show Edit Destroy
13:15 ~ 13:55	670M01	10 ~ CO2 System - Clean & Check Pipes, Nozzles & associated Components, Clean and check pipes, Nozzles and associated components.	C	Damen 1	Classroom 1	Show Edit Destroy
13:55 ~ 14:55	000000	Lunch Break	C		Classroom 1	Show Edit Destroy
14:55 ~ 15:10	670M01	11 ~ CO2 System - Weight the cylinder: Weight the cylinder.	C	Damen 1	Classroom 1	Show Edit Destroy
15:10 ~ 18:10	670M01	12 ~ On Board Familiarisation	O	Damen 1	On Board	Show Edit Destroy
Fri 28-Jul
Group 2
09:30 ~ 10:10	650P01	1 ~ The ship’s Fire Fighting System arrangements – Fire Main line.	C	Damen 1	Classroom 1	Show Edit Destroy
10:10 ~ 10:25	650P01	2 ~ Fire Hydrants and the Locations.	C	Damen 1	Classroom 1	Show Edit Destroy
10:25 ~ 10:40	000000	Morning Tea Break				Show Edit Destroy
10:40 ~ 11:40	650P01	3 ~ Operating the system using the Hoses, Nozzles and sprays.	C	Damen 1	Classroom 1	Show Edit Destroy
11:40 ~ 12:40	650P01	4 ~ The Sprinkler, CO2, Foam and the Water Mist system-General arrangements, general characteristics and operations.	C	Damen 1	Classroom 1	Show Edit Destroy
12:40 ~ 14:40	000000	Friday Lunch				Show Edit Destroy
14:40 ~ 15:10	650P01	5 ~ The External FF system - The general arrangements, general characteristics and operations.	C	Damen 1	Classroom 1	Show Edit Destroy
15:10 ~ 15:50	333P01	1 ~ Establish the Fresh Water Cooling System.	C	Damen 1	Classroom 1	Show Edit Destroy
15:50 ~ 16:10	333P01	2 ~ The Circulating Pumps and the Circulating FW.	C	Damen 1	Classroom 1	Show Edit Destroy
16:10 ~ 16:20	333P01	3 ~ The Heat Exchangers - Cooling process.	C	Damen 1	Classroom 1	Show Edit Destroy
16:20 ~ 16:35	000000	Tea Break				Show Edit Destroy
16:35 ~ 16:55	333P01	4 ~ Equipments and systems cooled.	C	Damen 1	Classroom 1	Show Edit Destroy
16:55 ~ 17:05	333P01	5 ~ Pre-Starting Checks and Safety Procedures.	C	Damen 1	Classroom 1	Show Edit Destroy
17:05 ~ 17:20	333P01	6 ~ Running the System - verify System Pressures and Temperatures and state of Alarm.	C	Damen 1	Classroom 1	Show Edit Destroy
17:20 ~ 18:20	333P01	7 ~ On Board Familiarisation.	O	Damen 1	On Board	Show Edit Destroy
Mon 31-Jul
Group 2
09:30 ~ 10:30	411P01	1 ~ Shore Supply: Perform Site Survey and to familirise with the overall system layout examine general conditions including to be acquinted system operating instruction prior to perform the task.	O	Damen 1	On Board	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:00	411P01	3 ~ Shore Supply - Check periodically the Phase Sequence Meter.	O	Damen 1	On Board	Show Edit Destroy
11:00 ~ 11:30	411P01	4 ~ Shore Supply - Functional Check of the Control Panel, meters, gauges, phase sequence meter prior ship shore connections prior to connection and termination.	O	Damen 1	On Board	Show Edit Destroy
11:30 ~ 12:00	411P01	6 ~ Shore Supply Safety Handling: Observe safety precaution and practices, handling of hazardous substance in performing the work.	O	Damen 1	On Board	Show Edit Destroy
12:00 ~ 12:30	411P01	2 ~ Shore Supply -Check and clean Earth bonding straps tightness and free from dirt and corrosion.	C	Damen 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:15	411P01	5 ~ Visual inspection of Shore supply connection panel and box.	C	Damen 1	Classroom 1	Show Edit Destroy
12:30 ~ 13:30	411P01	7 ~ Shore Supply: Practical Survey and Inspection on the Shore Supply System and Components onboard.	C	Damen 1	Classroom 1	Show Edit Destroy
13:30 ~ 14:30	000000	Lunch Break	C			Show Edit Destroy
14:30 ~ 14:45	411P01	8 ~ Shore Supply - Visual Inspection the Shore Supply cables and stowage reels.	C	Damen 1	Classroom 1	Show Edit Destroy
14:45 ~ 15:05	411P01	9 ~ Keep all electrical connections and mechanical fastenings tight according to right torque and the fastenings are dry, clean and rust free.	C	Damen 1	Classroom 1	Show Edit Destroy
15:05 ~ 15:20	000000	Tea Break				Show Edit Destroy
15:20 ~ 17:20	411P01	10 ~ Perform Practical Site Survey and inspection of the system and components onboard.	O	Damen 1	On Board	Show Edit Destroy
Tue 01-Aug
Group 2
09:30 ~ 09:50	400M02	1 ~ Transformers: Examine the general conditions of the transformer Units and functional status prior to perform any task.	C	Damen 1	Classroom 1	Show Edit Destroy
09:50 ~ 10:10	400M02	2 ~ Transformer: Examine for signs of abnormalities, dirt, dust and corrosion. Clean as necessary.	C	Damen 1	Classroom 1	Show Edit Destroy
10:10 ~ 10:30	400M02	3 ~ Transfomers: Examine and check the input voltage from 415VAC Panels and Output voltage 230VAC at DB panels.	C	Damen 1	Classroom 1	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:05	400M02	4 ~ Transformers: Clean, inspect and check insulation and earthing straps connections for tightness and corrosion.	C	Damen 1	Classroom 1	Show Edit Destroy
11:05 ~ 11:25	400M02	5 ~ Transformer: Check the ambient temperature and air flow cooling requirements, sign of noise and vibration.	C	Damen 1	Classroom 1	Show Edit Destroy
11:25 ~ 11:45	400M02	6 ~ Safety and Handling - Observe safety precaution and practices, handling of hazadous materials when performing the work.	C	Damen 1	Classroom 1	Show Edit Destroy
11:45 ~ 12:00	400M02	8 ~ Battery and Charging Units: :Examine the general conditions of the Units and functional status prior to perform any task.	C	Damen 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:15	400M02	9 ~ Battery and Charging Units: Check the physical conditions for any sign of defect and damage and check insulation cables and units.	C	Damen 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:30	400M02	10 ~ Battery and Charging Unit: Measure and record electrolyte SG reading in Battery Log Book.	C	Damen 1	Classroom 1	Show Edit Destroy
12:30 ~ 12:50	400M02	11 ~ Battery sets and Charging Units : Check and record the overall float voltage at the battery terminals.	C	Damen 1	Classroom 1	Show Edit Destroy
12:50 ~ 13:05	400M02	12 ~ Battery sets and Charging Units: Check ventilation cooling fan in battery spaces for correct operation.	C	Damen 1	Classroom 1	Show Edit Destroy
13:05 ~ 13:20	400M02	14 ~ UPS: Visual check the cells cleanliness, cracks, electrolyte leakage and signs of damage.	C	Damen 1	Classroom 1	Show Edit Destroy
13:20 ~ 14:20	000000	Lunch Break	C			Show Edit Destroy
14:20 ~ 14:35	400M02	16 ~ UPS: Check and record the overall float voltage at the battery terminals.	C	Damen 1	Classroom 1	Show Edit Destroy
14:35 ~ 14:50	400M02	19 ~ UPS Safety and Handling: Observe safety precaution and practices, handling of hazadous materials when performing the work.	C	Damen 1	Classroom 1	Show Edit Destroy
14:50 ~ 16:20	400M02	7 ~ Transformers: Practical Site Survey and Inspection on the System and Components onboard.	O	Damen 1	On Board	Show Edit Destroy
16:20 ~ 16:35	000000	Tea Break				Show Edit Destroy
16:35 ~ 16:50	400M02	13 ~ Uninterrupted Power Supply (UPS) for the 230 V systems: Examine the general conditions of the UPS Units and functional status prior to perform task.	O	Damen 1	On Board	Show Edit Destroy
16:50 ~ 17:05	400M02	15 ~ UPS: Check the ventilation system in the UPS spaces in good operating conditions.	O	Damen 1	On Board	Show Edit Destroy
17:05 ~ 17:20	400M02	17 ~ UPS: Check grounding and earthing straps for tightness and sign of corrosion.	O	Damen 1	On Board	Show Edit Destroy
17:20 ~ 17:35	400M02	18 ~ UPS: Run self Check or BITE and record results.	O	Damen 1	On Board	Show Edit Destroy
Wed 02-Aug
Group 2
09:15 ~ 10:15	400M02	20 ~ UPS: Practical Site Survey and Inspection on the System and Components onboard.	O	Damen 1	On Board	Show Edit Destroy
10:15 ~ 10:30	000000	Tea Break			Classroom 1	Show Edit Destroy
10:30 ~ 11:30	430M01	1 ~ Perform Site Survey and to familirise with the overall system layout examine general conditions including to be acquainted system operating instruction prior to perform the task.	O	Damen 1	On Board	Show Edit Destroy
11:30 ~ 12:00	430M01	2 ~ Switchboard (415V 50Hz) Panels 230 V 50Hz Switchboard Panels - Perform Inspection on loose electrical connections or mechanical fastenings and tighten them as necessary iaw required torque.	C	Damen 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:10	430M01	3 ~ Switchboard (415V 50Hz) Panels 230 V 50Hz Switchboard Panels - Check and visual inspection and all bus/ bus are clean and dry. To perform cleaning ensure the Switchboard /panel are de-energised.	C	Damen 1	Classroom 1	Show Edit Destroy
12:10 ~ 12:40	430M01	4 ~ Switchboard (415V 50Hz) Panels 230 V 50Hz Panel - The front panels of dead front switchboards: Visual inspection of the front panels of dead front switchboards frre from dirt and moiture and corrosion, Clean as necessary without de-energizing (Switch Off).	C	Damen 1	Classroom 1	Show Edit Destroy
12:40 ~ 12:55	430M01	5 ~ Switchboard (415V 50Hz) Panels 230 V 50Hz Switchboard Panels - Check and examine he front panels of dead front switchboards Instruments and metering display analog pointers and digital are zero(when Static) and calibrated.	C	Damen 1	Classroom 1	Show Edit Destroy
12:55 ~ 13:25	430M01	6 ~ Run self check on the instrument and display with BITE facilities.	O	Damen 1	On Board	Show Edit Destroy
13:25 ~ 14:25	000000	Lunch Break	C			Show Edit Destroy
14:25 ~ 14:55	430M01	7 ~ Switchboard (415V 50Hz), 230 V 50Hz Panels Protective circuits - Visually check and, over current or reverse current circuits, overload relays, and protective circuit performs its desired functions for fuses.	O	Damen 1	On Board	Show Edit Destroy
14:55 ~ 15:25	430M01	8 ~ Switchboard (415V 50Hz) Panels Bus Transfer Equipment - (Interconnecting Breakers, Supply Breakers,Shore Supply Breakers): Visually check are for operation at desired functions (When testing bus transfer equipment, should follow the safety precautions given for testing circuit breakers).	C	Damen 1	Classroom 1	Show Edit Destroy
15:25 ~ 15:40	430M01	9 ~ Switchboard (415V 50Hz), 230 V 50Hz Panels Fuses - Check and examine the right size and that they make firm contact with fuse clips. Ensure that lock-in devices (if provided) are properly fitted and that all fuse wiring connections are tight.	C	Damen 1	Classroom 1	Show Edit Destroy
15:40 ~ 16:10	430M01	10 ~ Switchboard (415V 50Hz), 230 V 50Hz Panels Distribution Boxes - Check the function of wiring distribution boxes (fused), with and without switches, feed circuits fuse clip barrel nuts and terminal connections tightness.	C	Damen 1	Classroom 1	Show Edit Destroy
16:10 ~ 16:25	000000	Tea Break				Show Edit Destroy
16:25 ~ 16:55	430M01	11 ~ Emergency Switchboard Panel - Check and examine he front panels of dead front switchboards Instruments and metering display analog pointers and digital are zero (when Static) and calibrated.	C	Damen 1	Classroom 1	Show Edit Destroy
16:50 ~ 17:20	430M01	12 ~ Emergency Switchboard Panel - Run self check on the instrument and display with BITE facilities and log the result in switchboard log book or computer system.	C	Damen 1	Classroom 1	Show Edit Destroy
Thu 03-Aug
Group 2
09:15 ~ 09:45	430M01	13 ~ Switchboard (415V 50Hz), 230 V 50Hz Panels Protective circuits - Visually check and, over current or reverse current circuits, overload relays, and protective circuit performs its desired functions for fuses.	C	Damen 1	Classroom 1	Show Edit Destroy
09:45 ~ 10:15	430M01	14 ~ Transformers - Visual inspection of the external parts are free from dirt and moisture and corrosion, clean as necessary without de-energizing (Switch Off).	C	Damen 1	Classroom 1	Show Edit Destroy
10:15 ~ 10:45	430M01	15 ~ Transformers check and clean earth bonding straps tightness and free from dirt and corrosion.	C	Damen 1	Classroom 1	Show Edit Destroy
10:45 ~ 11:00	000000	Morning Tea Break				Show Edit Destroy
11:00 ~ 11:30	430M01	16 ~ Transformers - Check and examine the electrical properties continuity, insulation are within the acceptable limits.	C	Damen 1		Show Edit Destroy
11:30 ~ 12:00	430M01	17 ~ Observe safety precautions, practices and handling of hazardous material in performing the work.	C	Damen 1		Show Edit Destroy
12:30 ~ 13:30	000000	Lunch Break	C			Show Edit Destroy
13:30 ~ 15:30	430M01	18 ~ Perform Practical Site Survey and inspection on the system and components onboard.	O	Damen 1	On Board	Show Edit Destroy
Sun 06-Aug
Group 2
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
11:00 ~ 11:15	000000	Morning Tea Break				Show Edit Destroy
11:45 ~ 15:45	000F12	1 ~ Familiarization Onboard.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
12:45 ~ 13:45	000000	Lunch Break	C			Show Edit Destroy
Mon 07-Aug
Group 2
09:15 ~ 09:35	810M01	1 ~ Navigation Light - Daily User functional check.	O	Damen 1	On Board	Show Edit Destroy
09:35 ~ 10:05	810M01	2 ~ Navigation Light - Check and test BITE functionalities.	O	Damen 1	On Board	Show Edit Destroy
10:05 ~ 11:05	310S11	2 ~ On Board Familiarisation.	O	Khairul Azuadi Bin Ariffin		Show Edit Destroy
10:05 ~ 10:25	810M01	3 ~ Navigation Light - Visual inspection of the control panel free from dust and dirt.	O	Damen 1	On Board	Show Edit Destroy
10:25 ~ 10:40	000000	Morning Tea Break				Show Edit Destroy
10:40 ~ 11:00	810M01	4 ~ Navigation Light - Clean and inspect the navigation light fitting.	O	Damen 1	On Board	Show Edit Destroy
11:00 ~ 11:20	810M01	5 ~ Navigation Light - Control Panel, Navigation and Signal Light System Check.	O	Damen 1	On Board	Show Edit Destroy
11:20 ~ 11:40	810M01	6 ~ Navigation Light - Clean, inspect and check insulation Control Panel.	O	Damen 1	On Board	Show Edit Destroy
11:20 ~ 11:50	370S01	1 ~ Functional check of various protective and overload devices and type of controllers employed.	C	Ahmad Bin Abdul Rahim		Show Edit Destroy
11:40 ~ 12:00	810M01	7 ~ Searchlight system - Visual and functional check.	O	Damen 1	On Board	Show Edit Destroy
11:50 ~ 12:20	370S01	2 ~ Ventilation Fan Motor: Check Motor conditions such as Air Flow,Temperature, RPM, noise and vibration.	C	Ahmad Bin Abdul Rahim		Show Edit Destroy
12:00 ~ 12:20	810M01	8 ~ Searchlight system - Check the cable connection fittings and continuity and insulation.	O	Damen 1	On Board	Show Edit Destroy
12:20 ~ 12:40	370S01	3 ~ Vent. Flaps, covers and trunking-inspect - Clean as necessary.	C	Ahmad Bin Abdul Rahim		Show Edit Destroy
12:20 ~ 12:40	810M01	9 ~ Acoustical signalling equipment - Visual and functional check.	O	Damen 1	On Board	Show Edit Destroy
12:40 ~ 13:10	370S01	4 ~ Measure Earth Bonding strap and fastenings Continuity and keep the fastenings are tight, clean, dry and free from rust.	C	Ahmad Bin Abdul Rahim		Show Edit Destroy
12:40 ~ 13:00	810M01	10 ~ Acoustical signalling equipment - Clean and inspect the devices for its correct operation.	O	Damen 1	On Board	Show Edit Destroy
13:00 ~ 14:00	000000	Lunch Break	C			Show Edit Destroy
Tue 22-Aug
Group 2
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
11:35 ~ 12:35	110F11	1 ~ Perform Site Survey and familiarization with the ICAF system layout and operation	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
12:35 ~ 14:35	000000	Friday Lunch				Show Edit Destroy
14:35 ~ 15:05	110F11	2 ~ Visually check cables inside power controller unit for damage and tightness.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
15:05 ~ 16:05	110F11	3 ~ Perform checks and inspections and identify fault conditions.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
16:05 ~ 16:20	000000	Tea Break				Show Edit Destroy
16:20 ~ 16:50	310S01	1 ~ Fire Main and the ships FF system-Establish system arrangements.	C	Khairul Azuadi Bin Ariffin	Classroom 2	Show Edit Destroy
16:50 ~ 17:30	310S01	2 ~ Connectivity of the fire Main to the Sprinkler & the Foam system- General characteristics, functions, operations and the utilisation.	C	Khairul Azuadi Bin Ariffin	Classroom 2	Show Edit Destroy
17:30 ~ 18:30	310S01	3 ~ CO2 and the Watermist system- General characteristics, functions, operations, and utilisation.	C	Khairul Azuadi Bin Ariffin	Classroom 2	Show Edit Destroy
Fri 25-Aug
Group 2
09:15 ~ 09:45	310S01	4 ~ Operation of the Bilge System- System arrangements of the bilges.	C	Khairul Azuadi Bin Ariffin	Classroom 2	Show Edit Destroy
09:45 ~ 10:15	310S01	5 ~ Operation of the Ballast system- System arrangements.	C	Khairul Azuadi Bin Ariffin	Classroom 2	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:30 ~ 11:30	310S01	6 ~ Performance of the Ballast pumps- Rate of filling the tanks and tank capacities, the resulting trim.	C	Khairul Azuadi Bin Ariffin		Show Edit Destroy
11:30 ~ 11:50	310S11	1 ~ The FF arrangements – Utilise for Deck Wash, Spray, Flushing and Draining.	O	Khairul Azuadi Bin Ariffin	On Board	Show Edit Destroy
Sat 26-Aug
Group 2
12:55 ~ 13:15	370S01	5 ~ Vent.flaps & covers-inspect perfom chalk test.	C	Ahmad Bin Abdul Rahim		Show Edit Destroy
13:15 ~ 13:45	370S01	6 ~ Functional check the functionalities of various protective and overload devices on mlotor and starters-controllers	C	TP TBD		Show Edit Destroy
13:45 ~ 14:45	000000	Lunch Break	C			Show Edit Destroy
14:45 ~ 15:05	370S01	7 ~ Inspect the earth bonding straps and mechnical fastening are tight free fom dirt, moisture and rust	C	TP TBD		Show Edit Destroy
15:05 ~ 15:25	370S01	8 ~ Inspect and test the equipment at sufficient intervals to make sure that the equipment is in operating condition.	C	TP TBD		Show Edit Destroy
15:25 ~ 15:45	370S01	9 ~ Observe cleanliness, corrosion control and preservation at all time when performing the task	C	TP TBD		Show Edit Destroy
15:45 ~ 16:05	370S01	10 ~ Observe safety precautions, practices and handling of hazadous material in performing the work.	C	TP TBD		Show Edit Destroy
Sun 27-Aug
Group 2
09:30 ~ 10:30	370S11	1 ~ Initial Walk around: Examine the general conditions and system operationn prior to perform the task.	O	TP TBD		Show Edit Destroy
10:45 ~ 11:45	370S11	2 ~ Ensure the filter mat are clean and dry.	O	TP TBD		Show Edit Destroy
13:45 ~ 14:45	000000	Lunch Break	C			Show Edit Destroy
14:45 ~ 16:45	370S11	3 ~ Practical Site Survey and inspection on the system and components onboard.	O	TP TBD		Show Edit Destroy
Mon 04-Sep
Group 2
13:00 ~ 17:00	000F11	1 ~ Familiarization Onboard.	O	TP TBD	On Board	Show Edit Destroy