Schedule By Group Daily Schedule By Topics Lecturer Class Room By Student No Lecturer

Listing schedules

From ~ To	Course	Topic	Type	Trainer	Classroom	Action
Thu 01-Jun
Group 4
08:30 ~ 09:10	640P01	1 ~ Dispersant Pumps & Boom - Clean & Inspect: Pumps, control panel, motor, valves, spray booms, hoses, loose fittings.	C	UMW 1	Classroom 1	Show Edit Destroy
09:10 ~ 09:40	640P01	2 ~ Dispersant Pumps & Boom: Functional checks – Setting up the system, pre starting checks and safety procedures, performance.	C	UMW 1	Classroom 2	Show Edit Destroy
09:40 ~ 09:50	640P01	3 ~ Dispersant Pumps & Boom - Clean, Inspect, Check Insulation – Motors, control panel, cables and termination, Insulation Tester.	C	UMW 1	Classroom 1	Show Edit Destroy
09:50 ~ 09:55	640P01	4 ~ Dispersant Pumps & Boom:Earthing straps, fastenings, Continuity tester.	C	UMW 1	Classroom 1	Show Edit Destroy
11:00 ~ 13:00	640P01	5 ~ Skimmer System - Operational Test – Setting up, pre starting checks, safety procedures, performance.	O	UMW 1	On Board	Show Edit Destroy
11:00 ~ 13:00	640P01	6 ~ On Board Familiarisation	O	UMW 1	On Board	Show Edit Destroy
Mon 05-Jun
Group 4
09:30 ~ 09:50	370P01	1 ~ Visual Check and inspect for leaks in HVAC system	C	Damen 1	Classroom 1	Show Edit Destroy
09:50 ~ 10:10	370P01	2 ~ Air conditioning system: Check pressure regulator for correct operations	O	Damen 1	On Board	Show Edit Destroy
10:10 ~ 10:25	370P01	3 ~ Air conditioning : Clean grease separator in hoods galley and pantry	O	Damen 1	On Board	Show Edit Destroy
10:25 ~ 10:40	370P01	4 ~ Air conditioning: Check pneumatic relays	O	Damen 1	On Board	Show Edit Destroy
10:55 ~ 11:10	370P01	5 ~ Air conditioning: Check fire protection flap with electro magnet device.	O	Damen 1	On Board	Show Edit Destroy
11:10 ~ 11:25	370P01	6 ~ Air Conditioning: Check, clean dust filter Air handling units,- Bridge, small arms store	O	Damen 1	On Board	Show Edit Destroy
11:25 ~ 11:40	370P01	7 ~ Air Conditioning Equipment: Check, clean dust filter Air handling units, - Ammunition, MCSR and small arms store	O	Damen 1	On Board	Show Edit Destroy
11:40 ~ 11:55	370P01	8 ~ Air Conditioning Equipment: Check electric motor and centrifugal fan - Various location	O	Damen 1	On Board	Show Edit Destroy
11:55 ~ 12:10	370P01	9 ~ Air Conditioning Equipment: Check sensors and controllers.	O	Damen 1	On Board	Show Edit Destroy
12:10 ~ 12:30	370P01	10 ~ Air Conditioning Equipment: Check, clean ventilation flap with pneumatic actuators.	O	Damen 1	On Board	Show Edit Destroy
13:30 ~ 13:45	370P01	11 ~ Air Conditioning Equipment: Check, clean non-return flap type- mechanically operated.	O	Damen 1	On Board	Show Edit Destroy
13:45 ~ 14:00	370P01	12 ~ Chilled water system: "Walk-Around visual Inspection ( Perform Daily Check & VI)"	O	Damen 1	On Board	Show Edit Destroy
14:00 ~ 14:15	370P01	13 ~ Chilled Unit: Check electrical motor and radial fan for regular operation.	O	Damen 1	On Board	Show Edit Destroy
14:15 ~ 14:35	370P01	14 ~ Chilled water system: Check air intakes and outlets for dirt deposits, clean if necessary.	O	Damen 1	On Board	Show Edit Destroy
14:35 ~ 14:50	370P01	15 ~ Emergency air-conditioning: Check for refrigerant leaks.	O	Damen 1	On Board	Show Edit Destroy
14:50 ~ 15:05	370P01	16 ~ Chilled water system: Check dust filter, replace if necessary.	O	Damen 1	On Board	Show Edit Destroy
Fri 09-Jun
Group 4
08:30 ~ 09:30	000F01	5 ~ Emergency Station.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
11:00 ~ 12:00	000F01	6 ~ SOLAS Equipment and Fire Fighting Onboard.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
Mon 12-Jun
Group 4
11:00 ~ 11:40	110P01	1 ~ Establish the arrangements - Anchor Chain and the Windlass.	C	Damen 1	Classroom 1	Show Edit Destroy
11:40 ~ 12:00	110P01	3 ~ The Control Panel and Controlling the speed.	C	Damen 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:15	110P01	4 ~ Inspect - The Braking Mechanism and Brake Pad.	C	Damen 1	Classroom 1	Show Edit Destroy
12:15 ~ 12:30	110P01	5 ~ Operate - Let Go, Heaving Anchor & Chain Stopper.	C	Damen 1	Classroom 1	Show Edit Destroy
12:30 ~ 12:45	110P01	6 ~ Washing Anchor and Chain – The process.	C	Damen 1	Classroom 1	Show Edit Destroy
12:45 ~ 12:55	110P01	7 ~ Oiling and Greasing the Windlass – The Procedure.	C	Damen 1	Classroom 1	Show Edit Destroy
16:00 ~ 16:10	110P01	8 ~ Adherence to Safety Precautions.	O	Damen 1	On Board	Show Edit Destroy
16:10 ~ 16:25	110P01	2 ~ The Windlass - Functions and Operations.	O	Damen 1	On Board	Show Edit Destroy
16:45 ~ 18:45	110P01	9 ~ On Board Familiarisation	O	Damen 1	On Board	Show Edit Destroy
Thu 15-Jun
Group 4
10:40 ~ 10:55	000000	Morning Tea Break				Show Edit Destroy
12:30 ~ 13:30	000000	Lunch Break	C			Show Edit Destroy
15:05 ~ 15:20	000000	Tea Break		Damen 1		Show Edit Destroy
Fri 16-Jun
Group 4
10:30 ~ 10:45	000000	Tea Break				Show Edit Destroy
12:30 ~ 14:30	000000	Friday Lunch				Show Edit Destroy
Mon 19-Jun
Group 4
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
12:35 ~ 13:35	000000	Lunch Break	C			Show Edit Destroy
15:15 ~ 15:35	822M01	96 ~ 18 .Antenna Radiator - Check for dirt and cracks on the radiator surface clean and repair as necessary.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
15:35 ~ 15:50	000000	Tea Break				Show Edit Destroy
Tue 20-Jun
Group 4
09:30 ~ 10:30	824M01	1 ~ Examine the general physical conditions of the system/Equipment and Principle of operation prior to perform any task.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:15	824M01	2 ~ Perform daily checks including Start up, running and shutdown procedures.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:15 ~ 11:45	824M01	4 ~ Clean and inspect panel from dirt and dust.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:45 ~ 12:15	824M01	5 ~ Battery System Inspect and replace backup battery should the battery capacity falls below limits.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:15 ~ 12:30	824M01	6 ~ Above Deck Equipment Antennas - Visual inspection for any signs of salt deposit, dirt and water. clean and preserve.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:35 ~ 13:35	000000	Lunch Break	C			Show Edit Destroy
13:35 ~ 13:55	824M01	7 ~ Check operation from Remote (ICS and INS Network) and Local Positions.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
13:55 ~ 14:10	824M01	8 ~ Connectors - Check that connectors on the rear panel are firmly tightened and free of rust.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
14:10 ~ 14:40	824M01	10 ~ Check that battery voltage is sufficient and fully charged and terminal are clean and free from rust.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
14:40 ~ 14:55	824M01	11 ~ Antenna Unit - Keep all electrical connections and mechanical fastenings tight according to right torque, and the fastenings are dry, clean and rust free.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
14:55 ~ 15:10	824M01	13 ~ LCD ambient temperature and humidity - Maintain cooling and ventilation for ambient temperature and humidity.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
15:10 ~ 15:25	824M01	14 ~ LCD Display - Clean and wipe the LCD display with soft cloth to remove dirt salt deposit.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
15:25 ~ 15:40	824M01	15 ~ Protective Device - Fuse is to protect over voltage and short circuit current and may be replaced with specified rating and size.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
15:40 ~ 15:55	000000	Tea Break				Show Edit Destroy
15:55 ~ 16:15	824M01	3 ~ Antennas - Check, Inspection and clean and preserve.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:15 ~ 16:30	824M01	9 ~ Earth bonding Straps - Check that the ground system is free of rust and the ground wire is tightly fastened.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:30 ~ 16:50	824M01	12 ~ Antenna Unit - Perform cleaning and remove dust, dirt and rust with detergent, do not use chemical cleaner or solvent.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:50 ~ 17:05	824M01	16 ~ Self check and BITE - Check the ROM, RAM, input /output data, GPS Core, Beacon, Keyboard and LCD performance.	C	Sinor Marine Technologies 1	On Board	Show Edit Destroy
17:05 ~ 17:20	824M01	17 ~ Inspect and test the equipment at sufficient intervals to make sure that the equipment is in operating condition.	C	Sinor Marine Technologies 1	On Board	Show Edit Destroy
17:20 ~ 18:20	824M01	18 ~ Perform Practical Site Survey and inspection of the system and components onboard.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
Wed 21-Jun
Group 4
09:30 ~ 10:00	825M01	1 ~ Examine the general layout conditions of Gyro Units and operation prior to perform the task.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
10:00 ~ 10:20	825M01	2 ~ Operator unit - functional checks free from dirt, dust and sign of corrosion including the pelorous position.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
10:20 ~ 10:40	825M01	3 ~ Operator unit - functional checks including starting up- running and shut-down.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
10:40 ~ 10:55	000000	Morning Tea Break				Show Edit Destroy
10:55 ~ 11:25	825M01	4 ~ Perform visual check on the Master Unit for sign of noise, vibration and failure. Clean the external unit free from dust and moisture.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:25 ~ 11:55	825M01	5 ~ Run self check and BITE at control panel and check Gyro Failure alarm.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:55 ~ 12:10	825M01	6 ~ Check the the main power supply and back up input to the Gyro Units are in good order.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:10 ~ 12:30	825M01	7 ~ Functional checks the electrical part of the Gyro repeater units and check sign of corrosion and watertight integrity.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:30 ~ 13:30	000000	Lunch Break	C			Show Edit Destroy
13:30 ~ 13:50	825M01	8 ~ Visual check ventilation and cooling facility maintaining ambient temperature in Gyro room in good order.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
13:50 ~ 14:10	825M01	9 ~ Observe safety precautions and practices cleanliness, corrosion control and preservation at all time when performing the task.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
14:10 ~ 15:40	825M01	10 ~ Practical Site Survey and inspection on the system and components onboard.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
15:40 ~ 15:55	000000	Tea Break				Show Edit Destroy
15:55 ~ 16:10	829M01	1 ~ Control and Display Unit- Clean and inspect externally	O	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
16:10 ~ 16:30	829M01	2 ~ Speed Log - Self test the system with BITE.	O	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
16:30 ~ 16:50	829M01	3 ~ Speed Log - Clean and inspect EM Log Sensor free from corrosion and dirt.	O	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
Thu 22-Jun
Group 4
09:30 ~ 10:00	828M01	1 ~ Examine the general layout conditions and system operation prior to perform the task.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
10:00 ~ 10:30	828M01	2 ~ Visual Check of Echo sounder cable connections between Display unit, Transmitter/Receiver (TX/RX) are intact and are not kink.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:05	828M01	3 ~ Display Unit - Clean and remove dust, dirt, moisture on the Display Unit.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:05 ~ 11:35	828M01	5 ~ Power Supply - Check the condition of power supplies input AC and DC supplies are available and connected to the system.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:35 ~ 12:05	828M01	6 ~ Battery - Check function of the LP of AC and DC supplies are good working order free from defect.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:05 ~ 12:35	828M01	8 ~ Replacing the Fuse. The fuse in the power cable protects the system from reverse polarity of the power supply and equipment fault.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:35 ~ 13:35	000000	Lunch Break	C			Show Edit Destroy
13:35 ~ 14:05	828M01	4 ~ Run Self Test or BITE to monitor starting , running and shutting down.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
14:05 ~ 14:35	828M01	7 ~ Observe cleanliness, corrosion control and preservation at all time when performing the task.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
14:35 ~ 16:05	828M01	9 ~ Practical Site Survey and inspection on the system and components onboard.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:05 ~ 16:20	000000	Tea Break				Show Edit Destroy
Tue 11-Jul
Group 4
08:30 ~ 09:00	822M01	2 ~ Navigation Radar - Functional checks and run Self Test or BITE to monitor starting , running and shutting down.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
09:00 ~ 09:15	822M01	4 ~ Visual check for any sign of dirt and corrosion.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
09:15 ~ 09:35	822M01	7 ~ Navigation Radar - Check and clean Earth bonding straps tightness and free from dirt and corrosion and measure Earth Bonding Continuity within tolerance.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
09:35 ~ 09:55	822M01	8 ~ Ground Terminal on Display unit - Check for tight connections.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
09:55 ~ 10:15	822M01	9 ~ LCD - Remove dust, dirt and salt deposit from LCD display.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:15 ~ 10:35	822M01	10 ~ Keep all electrical connections and mechanical fastenings tight according to right torque. and the fastenings are dry, clean and rust free.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:00 ~ 11:20	822M01	11 ~ Radar power switching On/Off from control unit or remote through BS station.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:20 ~ 11:35	822M01	12 ~ Power Supply and Services - Check power services are available before start the operation.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:35 ~ 11:50	822M01	13 ~ Processor Unit - Inspect and clean the external unit free from dirt, dust and rust.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
11:50 ~ 12:05	822M01	15 ~ Antenna Unit - Check the exposed nuts and bolts corroded and loose connection. Tighten and preserved accordingly.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:05 ~ 12:20	822M01	17 ~ Antenna Unit - Keep all electrical connections and mechanical fastenings tight according to right torque, and the fastenings are dry, clean and rust free.	C	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
12:45 ~ 13:45	000000	Lunch Break	C			Show Edit Destroy
13:45 ~ 17:45	000F11	1 ~ Familiarization Onboard.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
14:00 ~ 15:00	822M01	1 ~ Perform Site Survey to familirise with the overall system layout and examine general conditions, initiation of the standard operating instruction prior to perform the task.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
15:00 ~ 15:15	822M01	3 ~ Navigation Radar - Antenna Gearbox-Inspect V-Belt.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
15:15 ~ 15:30	822M01	5 ~ Navigation Radar - Visual check Antenna Gearbox or drive unit for sign of corrosion and dirt. Clean if necessary.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:00 ~ 16:15	822M01	6 ~ Clean and inspect consoles from dirt and dust.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:15 ~ 16:30	822M01	14 ~ Processor Unit - Check and examine Terminal Strips, sockets, earth terminals on processor unit for loose connection and proper seating of the plug.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:30 ~ 16:50	822M01	16 ~ Antenna Radiator - Check for dirt and cracks on the radiator surface clean and repair as necessary.	O	Sinor Marine Technologies 1	On Board	Show Edit Destroy
16:50 ~ 17:50	822M01	18 ~ Perform Practical Site Survey and inspection of the system and components onboard.	O	Sinor Marine Technologies 1	Classroom 4	Show Edit Destroy
Wed 12-Jul
Group 4
09:15 ~ 10:15	000F02	1 ~ Safety Systems and Lifesaving Equipment.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:30 ~ 12:30	000F02	2 ~ The Ship's Major System and Equipments.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
12:30 ~ 13:30	000F02	3 ~ The Ship's Auxiliary System.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
13:30 ~ 14:30	000000	Lunch Break	C			Show Edit Destroy
14:30 ~ 15:30	000F02	4 ~ Deck Machineries.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
15:30 ~ 15:45	000000	Tea Break				Show Edit Destroy
Thu 13-Jul
Group 4
09:15 ~ 10:15	000F02	5 ~ Other Electronics Equipments and systems Onboard.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 2	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:30 ~ 11:30	000F02	6 ~ Bilges, Ballast and Internal Fi-Fi System.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
12:30 ~ 13:30	000000	Lunch Break	C			Show Edit Destroy
13:30 ~ 17:30	000F12	1 ~ Familiarization Onboard.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
Fri 14-Jul
Group 4
09:15 ~ 09:30	110F01	1 ~ ICAF - Perform maintenance tasks which are specified under “Daily”.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
09:30 ~ 09:45	110F01	2 ~ Clean and upkeep the Control Panel and cabinet.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
09:45 ~ 10:15	110F01	3 ~ ICAF - Check the condition and functionality of Control Panel Unit and display.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
10:15 ~ 10:45	110F01	4 ~ Check cables connection on terminals for tightness and damage.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
10:45 ~ 11:00	000000	Morning Tea Break				Show Edit Destroy
11:00 ~ 11:20	110F01	5 ~ Electrical Checks on Protective devices and safety circuit.	C	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	Classroom 4	Show Edit Destroy
11:20 ~ 12:20	110F11	1 ~ Perform Site Survey and familiarization with the ICAF system layout and operation	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
12:20 ~ 14:20	000000	Friday Lunch				Show Edit Destroy
14:20 ~ 14:50	110F11	2 ~ Visually check cables inside power controller unit for damage and tightness.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
14:50 ~ 15:50	110F11	3 ~ Perform checks and inspections and identify fault conditions.	O	Kdr (Rtd) Ir Hj Mohamad Hussin Bin Abdullah	On Board	Show Edit Destroy
Sat 12-Aug
Group 4
09:30 ~ 10:30	000A00	1 ~ Training Launch Introduction	C	Caterpillar System	Classroom 4	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break		Caterpillar System		Show Edit Destroy
10:45 ~ 11:45	000F01	1 ~ Introduction OPV 1800.	C	Caterpillar System	Classroom 4	Show Edit Destroy
11:45 ~ 12:45	000F01	2 ~ Ship's Operational Capabilities.	C	Caterpillar System	Classroom 4	Show Edit Destroy
13:30 ~ 14:30	000000	Lunch Break	C	Caterpillar System		Show Edit Destroy
14:30 ~ 15:30	000F01	4 ~ Deck Arrangements.	C	Caterpillar System	Classroom 4	Show Edit Destroy
Tue 15-Aug
Group 4
09:15 ~ 09:45	371P01	1 ~ Administer the Range of Galley Equipment.	C	Staco 1	Classroom 1	Show Edit Destroy
09:45 ~ 09:50	371P01	2 ~ Establish the Fuse Boxes, Control panel.	C	Staco 1	Classroom 1	Show Edit Destroy
09:50 ~ 10:30	371P01	3 ~ Switching On Procedures and operating the Range of equipment.	C	Staco 1	Classroom 1	Show Edit Destroy
10:30 ~ 10:45	000000	Morning Tea Break				Show Edit Destroy
10:45 ~ 11:15	371P01	4 ~ Establish the ventilation and exhaust system and Switching on procedures.	C	Staco 1	Classroom 1	Show Edit Destroy
11:15 ~ 11:35	371P01	5 ~ Safety Procedures - operating the Foam and CO2 system before, during and after use.	C	Staco 1	Classroom 1	Show Edit Destroy
11:35 ~ 11:55	371P01	6 ~ Daily maintenance of equipment after use.	C	Staco 1	Classroom 1	Show Edit Destroy
11:55 ~ 12:55	371P01	7 ~ On Board Familiarisation	O	Staco 1	On Board	Show Edit Destroy
Wed 16-Aug
Group 4
09:15 ~ 10:15	570P01	1 ~ Perform Site Survey to familirise with the overall system layout and examine general conditions, initiation of the standard operating instruction prior to perform the task.	O	Vestdavit 1	On Board	Show Edit Destroy
10:15 ~ 10:35	570P01	2 ~ Davits - Check hydraulic system for damage and leaks.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
10:35 ~ 10:50	000000	Morning Tea Break				Show Edit Destroy
10:50 ~ 11:10	570P01	3 ~ Davits - Check the davit for visible damages free from dirt, rust and damage.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
11:10 ~ 11:25	570P01	4 ~ Davit - Functional check that the davit can move freely in its operation area. Switch “ON” MCCB on starter panel.	O	Vestdavit 1	On Board	Show Edit Destroy
11:25 ~ 11:40	570P01	5 ~ Davits - Apply grease to necessary points as specified in Operation Manual or PMS.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
11:40 ~ 12:00	570P01	6 ~ Check hydraulic system clean and dry free from dirt, salt deposit, and corrosion free.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
12:00 ~ 12:20	570P01	7 ~ Keep all electrical connections and mechanical fastenings tight according to right torque. and the fastenings are dry, clean and rust free.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
12:20 ~ 12:40	570P01	8 ~ Check and clean Earth bonding straps tightness and free from dirt and corrosion.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
12:40 ~ 13:00	570P01	9 ~ Inspect and test the equipment at sufficient intervals to make sure that the equipment is in operating condition.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
13:00 ~ 13:20	570P01	10 ~ Observe cleanliness, corrosion control and preservation at all time when performing the task.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
13:20 ~ 14:20	000000	Lunch Break	C			Show Edit Destroy
14:20 ~ 14:40	570P01	11 ~ Power Supply Services - Check power ON and Off of the system prior to start operation.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
14:40 ~ 15:00	570P01	12 ~ Inspect and test the equipment at sufficient intervals to make sure that the equipment is in operating condition.	C	Vestdavit 1	Classroom 1	Show Edit Destroy
15:00 ~ 15:15	000000	Tea Break				Show Edit Destroy
15:15 ~ 17:15	570P01	13 ~ Perform Practical Site Survey and inspection of the system and components onboard.	O	Vestdavit 1	On Board	Show Edit Destroy
Thu 17-Aug
Group 4
09:15 ~ 09:30	570P02	1 ~ Rescue Boat - Check and verify the inventory list as fitted.	O	Vestdavit 1	On Board	Show Edit Destroy
09:30 ~ 09:45	570P02	2 ~ Rescue Boat - Check propulsion or outboard engine start and stop function and bilge pump.	O	Vestdavit 1	On Board	Show Edit Destroy
09:45 ~ 10:00	570P02	3 ~ Rescue Boat - Visual condition of stowage and releasing and recovery mechanism.	O	Vestdavit 1	On Board	Show Edit Destroy
10:00 ~ 10:15	570P02	4 ~ Rescue Boat - Condition of hull inside & outside any sign of damage or corrosion.	O	Vestdavit 1	On Board	Show Edit Destroy
10:15 ~ 10:30	000000	Morning Tea Break				Show Edit Destroy
10:30 ~ 10:45	570P02	5 ~ Rescue Boat - Check the Bilge keel and hull appendages on both sides in good order.	O	Vestdavit 1	On Board	Show Edit Destroy
10:45 ~ 11:00	570P02	6 ~ Davit - Check the davit for visible damages free from dirt, rust and damage.	O	Vestdavit 1	On Board	Show Edit Destroy
11:00 ~ 11:15	570P02	7 ~ Davit - Apply grease to necessary points as specfied in Operation Manual or PMS.	O	Vestdavit 1	On Board	Show Edit Destroy
11:15 ~ 11:30	570P02	8 ~ Davit - Functional check that the davit can move freely in its operation area. Switch “ON” MCCB on starter panel.	O	Vestdavit 1	On Board	Show Edit Destroy
11:30 ~ 11:45	570P02	9 ~ Davit -Check wire rope of the hoist is in perfect condition and good order.	O	Vestdavit 1	On Board	Show Edit Destroy
11:45 ~ 12:00	570P02	10 ~ Life Rafts - Self-protection of with cover from direct heat.	O	Vestdavit 1	On Board	Show Edit Destroy
12:00 ~ 12:15	570P02	11 ~ Life Raft - Keep clean the life raft from salt deposit and moisture.	O	Vestdavit 1	On Board	Show Edit Destroy
12:15 ~ 12:30	570P02	12 ~ Life Raft - Check Condition of stowage and releasing mechanism.	O	Vestdavit 1	On Board	Show Edit Destroy
12:30 ~ 12:45	570P02	13 ~ Life Raft - Visual Inspection the external condition for any sign of damage.	O	Vestdavit 1	On Board	Show Edit Destroy
12:45 ~ 13:00	570P02	14 ~ Life Raft - Check and record the Service interval date and next periodic service.	O	Vestdavit 1	On Board	Show Edit Destroy
13:00 ~ 14:00	000000	Lunch Break	C			Show Edit Destroy
Fri 18-Aug
Group 4
10:25 ~ 10:40	000000	Morning Tea Break		UMW 1	Classroom 1	Show Edit Destroy
12:55 ~ 14:55	000000	Friday Lunch				Show Edit Destroy
Mon 21-Aug
Group 4
09:15 ~ 09:30	680M01	1 ~ Check Oil Level – PCU Compressor.	O	Staco 1	On Board	Show Edit Destroy
09:30 ~ 09:50	680M01	2 ~ PCU SW Pump - Run pump if not in regular use: Pre starting checks, check performance, leaks and abnormalities.	C	Staco 1	Classroom 1	Show Edit Destroy
09:50 ~ 10:20	680M01	3 ~ Clean & Inspect – PCU SW Pump, pipes ,couplings, valves mountings, fastenings.	C	Staco 1	Classroom 1	Show Edit Destroy
10:20 ~ 10:35	000000	Morning Tea Break				Show Edit Destroy
10:35 ~ 10:55	680M01	4 ~ PCU - Check Refrigerant, Procedure of checks.	C	Staco 1	Classroom 1	Show Edit Destroy
10:55 ~ 11:10	680M01	5 ~ PCU - Checks for Leaks, Procedure of checks.	C	Staco 1	Classroom 1	Show Edit Destroy
11:10 ~ 11:40	680M01	6 ~ PCU Compressor Motor - Functional checks: Pre starting checks, check performance and abnormalities.	C	Staco 1	Classroom 1	Show Edit Destroy
11:40 ~ 12:10	680M01	7 ~ PCU SW Pump Motor - Functional checks: Pre starting checks, performance and abnormalities.	C	Staco 1	Classroom 1	Show Edit Destroy
12:10 ~ 12:40	680M01	8 ~ PCU Control Panel - Functional checks: Check system operation, performance and abnormalities.	C	Staco 1	Classroom 1	Show Edit Destroy
12:40 ~ 13:00	680M01	9 ~ Clean & Inspect – PCU Control Panel, switches and indicators, cables and terminations.	C	Staco 1	Classroom 1	Show Edit Destroy
13:00 ~ 13:10	680M01	10 ~ PCU Compressor Motor - Clean Inspect & Check Insulation Pre starting checks, Cables and terminations, Insulation tester.	C	Staco 1	Classroom 1	Show Edit Destroy
13:10 ~ 13:20	680M01	11 ~ PCU SW Pump Motor - Clean Inspect & Check Insulation – Pre starting checks, cables and terminations, Insulation tester.	C	Staco 1	Classroom 1	Show Edit Destroy
13:20 ~ 13:25	680M01	12 ~ Clean Inspect & Check Insulation – Pre starting checks, cables and terminations, Insulation Tester.	C	Staco 1	Classroom 1	Show Edit Destroy
13:25 ~ 13:40	680M01	13 ~ Check Combined High-Low Pressure Switch – Procedure of setting the Pressure switches.	C	Staco 1	Classroom 1	Show Edit Destroy
13:40 ~ 14:40	000000	Lunch Break	C			Show Edit Destroy
14:40 ~ 14:55	680M01	14 ~ PCU Compressor - Change LO– Pre starting checks, clean strainers.	C	Staco 1	Classroom 1	Show Edit Destroy
14:55 ~ 15:05	680M01	15 ~ PCU Compressor Motor - Inspect earth bonding: Earthing straps, fastenings, Continuity Tester.	O	Staco 1	On Board	Show Edit Destroy
15:05 ~ 15:10	680M01	16 ~ PCU SW Pump Motor - Inspect earth bonding: Earthing straps, fastenings, Continuity tester.	C	Staco 1	Classroom 2	Show Edit Destroy
15:10 ~ 15:15	680M01	17 ~ PCU Control Panel - Inspect earth bonding: Earthing straps, fastenings, Continuity Tester.	C	Staco 1	Classroom 1	Show Edit Destroy
15:15 ~ 15:30	000000	Tea Break				Show Edit Destroy
15:30 ~ 17:30	680M01	18 ~ On Board Familiarisation	O	Staco 1	On Board	Show Edit Destroy